Home > Knowledge > Content
The solution to the fading of printing protective film
- Dec 05, 2018 -

After the printing is completed, because the protective film is entangled in a whole roll, the printed pattern and the glue are stuck together, and the time is long, or when the adhesiveness of the protective film glue is large, it is easier to use the glue during the process of use. The printed pattern is glued down, which is not beautiful, and it is easy to paste the color remaining on the glue water onto the product after the product is pasted.

We can combine the printed pattern on the other side of the protective film to make the pattern in the two substrates to eliminate the problem of color loss. In the process of using the protective film, the printed content is in the middle of the two substrate films, and does not come into contact with the glue to be adhered, thereby perfectly solving the problem.

Website:http://www.kingrealfilm.com/

Email:service@kingrealfilm.com