Home > Knowledge > Content
Self adhesive film for hard surface and comparison and production equipment
- Nov 22, 2018 -

The self-adhesive film is, in general, a soft film with high transparency and elasticity. It is a linear low-density polyethylene with a small amount of excipients as a main raw material for uniform mixing, and is melted and plasticized by an extrusion system to be co-extruded. A protective film. The advantage of this kind of protective film is that it has high tensile strength and tear strength, and has good self-adhesiveness, and can be easily adhered to the surface of the object without using glue or the like. Therefore, this type of protective film is called a self-adhesive film and is widely used in industries such as foods, beverages, and pharmaceuticals.


The self adhesive film for hard surface has a certain limitation in the scope of use compared with the ordinary self-adhesive film, because it is aimed at the hard surface, but it is still the same in function, or protects this effect.


The purchase of hard surface self-adhesive film is an important task that needs to be taken seriously and carried out, because if the wrong choice occurs, it will affect the normal use of the product and its use effect, and even the product will not be used normally. Cause product waste and economic losses to users. In the process of purchasing, it is necessary to take all relevant factors into consideration. Among them, the five factors of product origin, parameters, price, quality, and manufacturer must be considered, and one cannot be missed.


The self adhesive film for hard surface can be PE self-adhesive, and can have good performance and use effect in use. Moreover, the PE self-adhesive film is usually co-extruded in two or more layers, and one of the films is made of a self-adhesive material, and can be self-adhesive without applying glue.


The hard surface is self-adhesive, which has production equipment, and is composed of a frame, an extruder, a die and the like, and a traction bracket is arranged on the top platform, and the traction bracket is provided with a herringbone row, a traction device and Trimming device. In addition, the rotating mechanism is disposed coaxially with the rotating platform, and the rotating platform is connected to the beam platform through the supporting column. By adopting this structure, the stickiness and discount in the production of the product can be reduced, and the product quality can be improved.