Home > Knowledge > Content
Protective requirements and adhesion of floor surface protective film
- Dec 06, 2018 -

Renovated at home, you can decorate the floor with a protective film on the ground. The ground protective film is made of 24 wire PVC and knitted cotton. PVC can effectively prevent liquid and dust from entering. Knitted cotton is laid on the ground, it will not scratch the ground, and it can buffer the heavy objects on the ground. More effectively protect floor tiles, marble, etc.

Floor surface protection film protection

First, the protection of the entrance door

The entry of various decoration materials and the cleaning of various construction and decoration garbage will pass through the entrance door. During the handling process, the chances of bumping and friction with the entrance door are greatly increased. Therefore, the first one needs to be done. The place where good finished products are protected is our entry door. Suggestion: Before the renovation starts, it is necessary to protect the entrance door until the furniture enters the venue! For this, the finished protective film can be used to wrap the door.

Second, the protection of hydropower transformation

1. When the circuit is rebuilt, the slot can be slotted as much as possible.

2. The place where it cannot be slotted must be fixed and protected.

3. The water pipe should be sealed.

4. Wrap the bare wire as much as possible.

Third, tile, floor protection

The paving of tiles and floors is also part of the basic decoration. It is often found that there is no finished product protection work during and after the construction of the tiles. The specific performances are: the seams of the tiles are laid, the tiles are laid on the tiles, and the floor is stacked. Miscellaneous and freshly tiled tiles are walked on the treads, floor tiles, and the floor is not covered with a finished protective film. These will affect the paving effect of the tiles and cause the construction quality of the tiles.

 

https://www.kingrealfilm.com/