Duct Shield Protective Film

Protect all types of duct work with this adhesive duct protection film. Duct Cover Shield will not leave a residue on metal after removal and is highly resistant to punctures. Product Details The ultimate film for duct protection. Duct Shield Protective film is a self-adhering protective film...

Send InquiryChat Now
Product Details

Protect all types of duct work with this adhesive duct protection film. Duct Cover Shield will not leave a residue on metal after removal and is highly resistant to punctures.

1(001).jpg


Product Details

The ultimate film for duct protection. Duct Shield Protective film is a self-adhering protective film for HVAC ducts. It has a very high adhesion, yet it won't leave a residue on metal after removal. This durable film is very resistant to tears and punctures. Duct Shield Protective film also helps to meet SMACNA guidelines for providing temporary closures on open duct work.


Specification of Duct Shield Protective Film

Thickness 3 mil nominalAdhesive Type Water-based Acrylic
Film Low Density PolyethyleneAdhesion Level 12.7 oz/in
Tensile Strength 2800 psiChemical Family Acrylic PSA Polyethylene Film
Temperature (Ideal) 70° FChemical Formula Proprietary
Humidity (Ideal) 50%Trade Name Duct Cover Shield
Elongation (%) >300 %Material Use Provides temporary closures
Chemical Name Acrylic PSA


Duct Shield Protective Film Features

Duct Shield Protective Film.png Self-adhering protective film for HVAC ducts


Very high adhesion for all types of metal duct work


Will not leave a residue on metal after removal


Highly resistant to tears and punctures


Helps to meet SMACNA guidelines for providing temporary duct work closures

Duct Shield Protective Film.png


FAQ

INSTRUCTIONS 

Peel back edge of Duct Shield Protective film and begin to unroll. Press down edge at beginning of area to be covered so Duct Shield adheres. Continue rolling onto area, applying pressure and smoothing down the film while doing so. Carefully cut end with a sharp edge. When finished, fold edge of the film back against the roll to use at a later time. Removal: roll up Duct Shield Protective film and discard.

HANDLING AND STORAGE 

Store at room temperature. If Duct Cover Shield is stored in extreme conditions over 95° F or below 40° F allow product to return to room temperature prior to use.

SAFETY 

SDS sheets for Surface Shields products available by request.


Hot Tags: duct shield protective film, suppliers, factory, custom, free sample
Related Products
Inquiry